Datasheet

Required Debug Headers
DS51292T-page 8  2006-2012 Microchip Technology Inc.
AC162050, AC162058
Header Identification
The header AC number is used for ordering the header. However, this number is not
on the debug header, as the board is often used for multiple headers by inserting
different ICE/ICD devices. To identify these debug headers, use the following
information.
Header Setup and Operation
For these headers, device peripherals need to be selected by setting jumper J1 to the
appropriate position. For AC162050, this will have the effect of selecting the device.
Header Limitations
See the “Limitations” section in your debug tool online Help file for details.
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
PIC16F685/687 20 AC162061 PIC16F690-ICD
5.5V
PIC16F688 14 AC162056
PIC16F688-ICD
5.5V
PIC16F689/690 20 AC162061
PIC16F690-ICD
5.5V
PIC16F716 18 AC162054 PIC16F716-ICD 5.5V
PIC16F785/HV785 20 AC162060
PIC16F785-ICD
5.5V
PIC18F13K50
PIC18F14K50
20 AC244023
PIC18F14K50-ICE
5.5V
PIC18LF13K50
PIC18LF14K50
20 AC244024
PIC18LF14K50-ICE
3.6V
2.75V
(2)
PIC24F04KA200
PIC24F04KA201
14
20
AC244028 PIC24F16KA102-ICE
(3)
3.6V
Note 1: Dual die
Note 2: V
DDCORE Max
Note 3: Header optional for other devices
TABLE 1: REQUIRED DEBUG HEADERS BY DEVICE (CON’T)
Device
Pin
Count
Header Part
Number
ICE/ICD Device Used V
DD Max
Header ICE/ICD Device Board Assembly Number
AC162050 PIC12F675-ICD 02-01662
AC162058 PIC12F683-ICD
Header Jumper J1 Function Device Selected
AC162050 2-3 A/D Disabled PIC12F629
1-2 A/D Enabled PIC12F675
AC162058 1-2 A/D Enabled PIC12F683