Datasheet

Required Debug Headers
 2006-2012 Microchip Technology Inc. DS51292T-page 29
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 13: DIMENSIONS - AC244045
Dimensions are in inches
6-pin Modular Connector 
See Appendix B. “Debug Header
Connections” for details.
Target Pin 1 Located
on Bottom side of Header
0.410 Typical
0.062 Typical
0.165 Typical0.165 Typical
1.800
0.540
0.300
0.350
1.150
ICE
Device