Datasheet

25XX080A/B
DS21808D-page 2 © 2007 Microchip Technology Inc.
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. V
SS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature .................................................................................................................................-65°C to 150°C
Ambient temperature under bias...............................................................................................................-65°C to 125°C
ESD protection on all pins..........................................................................................................................................4 kV
TABLE 1-1: DC CHARACTERISTICS
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an
extended period of time may affect device reliability.
DC CHARACTERISTICS
Industrial (I): TAMB = -40°C to +85°C VCC = 1.8V to 5.5V
Automotive (E): T
AMB = -40°C to +125°C VCC = 2.5V to 5.5V
Param.
No.
Sym. Characteristic Min. Max. Units Test Conditions
D001 V
IH1 High-level input
voltage
2.0 VCC +1 V VCC ≥ 2.7V (Note)
D002 V
IH2 0.7 VCC VCC +1 V VCC< 2.7V (Note)
D003 VIL1 Low-level input
voltage
-0.3 0.8 V VCC ≥ 2.7V (Note)
D004 VIL2 -0.3 0.2 VCC VVCC < 2.7V (Note)
D005 V
OL Low-level output
voltage
—0.4VIOL = 2.1 mA
D006 VOL —0.2VIOL = 1.0 mA, VCC < 2.5V
D007 VOH High-level output
voltage
VCC -0.5 — V IOH = -400 μA
D008 I
LI Input leakage current ±1 μACS = VCC, VIN = VSS TO VCC
D009 ILO Output leakage
current
±1 μACS = VCC, VOUT = VSS TO VCC
D010 CINT Internal Capacitance
(all inputs and
outputs)
—7pFTAMB = 25°C, CLK = 1.0 MHz,
V
CC = 5.0V (Note)
D011 I
CC Read
Operating Current
—
—
6
2.5
mA
mA
VCC = 5.5V; FCLK = 10.0 MHz;
SO = Open
VCC = 2.5V; FCLK = 5.0 MHz;
SO = Open
D012 I
CC Write —
—
3mAVCC = 5.5V
D013 Iccs
Standby Current
—
—
5
1
μA
μA
CS
= VCC = 5.5V, Inputs tied to VCC or
V
SS, TAMB = -40°C TO +125°C
CS
= VCC = 2.5V, Inputs tied to VCC or
V
SS, TAMB = -40°C TO +85°C
Note: This parameter is periodically sampled and not 100% tested.