Datasheet

24AA08/24LC08B
DS21710K-page 2  2002-2012 Microchip Technology Inc.
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
(†)
VCC.............................................................................................................................................................................6.5V
All inputs and outputs w.r.t. V
SS ......................................................................................................... -0.3V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-40°C to +125°C
ESD protection on all pins  4 kV
TABLE 1-1: DC CHARACTERISTICS
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
DC CHARACTERISTICS
V
CC = +1.7V to +5.5V
Industrial (I): T
A = -40°C to +85°C
Automotive (E): T
A = -40°C to +125°C
Param.
No.
Symbol Characteristic Min. Typ. Max. Units Conditions
— WP, SCL and SDA pins — — — — —
D1 VIH High-level input voltage 0.7 VCC — — V —
D2 VIL Low-level input voltage — — 0.3 VCC V —
D3 V
HYS Hysteresis of Schmitt
Trigger inputs (SDA,
SCL pins)
0.05 VCC — — V (Note)
D4 VOL Low-level output voltage — — 0.40 V IOL = 3.0 mA, VCC = 2.5V
D5 ILI Input leakage current — — ±1 A VIN = .1V to VCC
D6 ILO Output leakage current — — ±1 A VOUT = .1V to VCC
D7 CIN,
C
OUT
Pin capacitance
(all inputs/outputs)
— — 10 pF VCC = 5.0V (Note)
T
A = 25°C, FCLK = 1 MHz
D8 ICC write Operating current — 0.1 3 mA VCC = 5.5V, SCL = 400 kHz
D9 I
CC read — 0.05 1 mA —
D10 ICCS Standby current —
—
0.01
—
1
5
A
A
Industrial
Automotive
SDA = SCL = VCC
WP = VSS
Note: This parameter is periodically sampled and not 100% tested.