User`s guide

MPLAB
®
IDE User’s Guide
DS51519B-page 256 © 2006 Microchip Technology Inc.
WDT (Watchdog Timer) Options
Choose one of the following to determine the simulator behavior when it detects WDT
Time-out.
• Break On WDT time-out
• Reset on WDT time-out
21.4.3 Trace/Pins tab
Select Debugger>Settings and then click the Trace/Pins tab.
• MCLR Pull-up Enabled - If this is checked, MCLR
Pull-up will be enabled.
Trace Options
• Trace Enabled - If checked, instruction execution will be traced.
• Break on Trace Buffer Full - If checked, the simulator will halt when the trace
buffer is full.
Note: The WDT group is disabled if the WDT is disabled in the Configuration Bits
window (Configure>Configuration Bits
).