User`s guide

MPLAB IDE Windows

12.16.1 SFRs Window Display

Data is displayed in the following columns.

• Address – SFR hexadecimal address.

• SFR Name – Symbolic name for the SFR.

• Hex – Hexadecimal value, shown in 1-byte blocks.

• Decimal – Value in decimal format.

• Binary – Value in binary format.

• Char – Value in character format.

12.16.2 SFRs Window Menu

Below are the menu items in the Special Function Registers right mouse button menu.

Close this window.

Bitfield Mouseover

Enable/disable bitfield value mouseover. SFR window must be the active window (in

focus) for this feature to work.

Find

Find text specified in the Find dialog in this window.

Find Next

Find the next instance of Find text.

<F3> repeats the last Find.

<Shift>+<F3> reverses the direction of the last Find.

Go To

Go to the specified item of the Go To dialog. (See Section 13.14 “Go To Dialog”.)

Fill Registers

Fill registers from Start Address to End Address with the value in Data. See

Section 13.11 “Fill Memory/Registers Dialog”.

Output to File

Write the displayed window contents to a text file. Uses a Save As dialog (see

Section 13.10 “File Management Dialog”), with the addition of an “Output Range”

and tab-delimited option checkbox. Select the type of range, either “Lines” or

“Address”, and then enter the “Start” and “End” values to output.

Print the contents of the window.

Refresh

Refresh the data in this window.

Properties

Set up window properties. See Section 13.21 “Properties Dialog”.

Note: Not all SFRs are writable and some are mirrored.