User`s guide

ZENA™ Wireless Network Analyzer User’s Guide

5.2.6 Generating the Configuration Files

When all of the options on the tabs are set appropriately, generate the Stack

configuration file by clicking Generate Files. The ZENA analyzer will perform a validity

check to ensure that all required fields have appropriate values and all protocol-specific

ranges are met.

If the validity check passes, the ZENA analyzer will prompt for an output directory for

the configuration file, P2PDefs.h. This file has a time and date stamp included in the

file. This file is expected to be included in the application project to make all chosen

configurations in the ZENA analyzer effective.

5.3 BASIC NETWORK MONITORING

Basic monitoring of a MiWi P2P protocol network is nearly identical to that of a ZigBee

protocol network. Please review Section 3.3 “Basic Network Monitoring”. This

section focuses on the differences between the two protocols.

Select MiWi

P2P Tools> Network Traffic Monitor to perform real-time network monitor-

ing or packet analysis of a MiWi P2P protocol network. The fundamental MiWi P2P Net-

work Monitor window is nearly identical to the ZigBee Network Monitor window.

MiWi protocol beacons have a slightly different format than ZigBee protocol beacons,

as shown in this sequence of a device joining a network.