User`s guide

MiWi™ P2P Wireless Networking Protocol Tools

5.2.4 Specifying NWK and MAC Layer Information

Select the NWK/MAC tab (refer to Figure 5-4).

FIGURE 5-4: ZENA™ STACK CONFIGURATION – MiWi™ P2P PROTOCOL

WINDOW, NWK/MAC TAB

This tab is used to configure the NWK (Network) and MAC (Medium Access Controller)

Stack layers. Many options on this tab are enabled or disabled based on the “IEEE

Device Type” specified on the P2P Device tab.

This tab is used to configure the following options: