User`s guide

ZENA™ Wireless Network Analyzer User’s Guide
DS51606C-page 72 © 2008 Microchip Technology Inc.
5.2.3 Specifying Security Information
Select the Security tab (refer to Figure 5-3).
FIGURE 5-3: ZENA™ STACK CONFIGURATION – MiWi™ PROTOCOL
WINDOW, SECURITY TAB
Using this window, you can configure the following items:
TABLE 5-3: MiWi™ P2P PROTOCOL SECURITY CONFIGURATION SELECTION
Configuration Option Description
Security Capable Check this option to enable security features in the MiWi™ P2P Stack.
Security Key This is the 16 byte security key for the AES security engine, along with the security key
sequence number.
Security Level Select the IEEE security level defined in IEEE 802.15.4™ specification.