User`s guide

ZENA™ Wireless Network Analyzer User’s Guide

5.2.1 Specifying MiWi P2P Protocol Device Information

Select the P2P Device tab (refer to Figure 5-1). Refer to Table 5-1 for configuration

options for MiWi P2P devices.

FIGURE 5-1: ZENA™ STACK CONFIGURATION – MiWi™ P2P PROTOCOL

WINDOW, P2P DEVICE TAB

TABLE 5-1: MiWi™ P2P PROTOCOL DEVICE CONFIGURATION SELECTION

Configuration Option Description

MAC Address Each and every MiWi™ P2P protocol device must have its own

unique MAC address. The Microchip OUI is provided as a default

for development purpose only. For additional information, see

AN1204, “MiWi P2P Wireless Protocol”.

IEEE Device Type Select whether your application is a Full Function Device (FFD)

or a Reduced Function Device (RFD). The difference between

FFD and RFD in the MiWi P2P protocol is that an RFD goes to

sleep periodically and thus can be powered by a battery.

Data Polling Select this option to enable the RFD to poll data from its associ-

ated FFDs. This option needs to be checked if the RFD expects

to receive messages from other devices.