User`s guide

ZENA™ Wireless Network Analyzer User’s Guide

TABLE 4-4: MiWi™ PROTOCOL NWK/MAC CONFIGURATION SELECTION

Configuration Option Description

Transmit Buffer Size

(bytes)

Enter the number of bytes for the largest transmitted message. The largest possible

message is 127 bytes.

Receive Buffer Size

(bytes)

Enter the number of bytes for the largest received message. The largest possible

message is 127 bytes.

Network Discovery

Timeout (seconds)

Enter the length of time the application will scan each channel in search of networks to

join.

Open Cluster Socket

Timeout (seconds)

Enter the length of time the application will wait for a socket confirmation from the PAN

coordinator.

Indirect Buffer Size (bytes) FFDs only. Enter the number of bytes reserved for buffering messages for child devices.

Indirect Buffer Timeout

(seconds)

FFDs only. Enter the length of time that the device will buffer a message for a child before

discarding it.

Data Request Rate

(seconds)

RDFs only. Enter the frequency at which the device will request data from its parent.

Network Table Size The network table is used to store information about other devices on the network. The

table must be large enough to hold one entry for each of the device’s children and for any

nodes the device communicates with either directly or indirectly.

Maximum Message Hops Enter the maximum number of hops a message can travel.