User`s guide

MiWi™ Wireless Networking Protocol Tools

4.2.4 Specifying NWK and MAC Layer Information

Select the NWK/MAC tab.

FIGURE 4-4: ZENA™ STACK CONFIGURATION – MiWi™ PROTOCOL

WINDOW, NWK/MAC TAB

This tab is used to configure the NWK (Network) and MAC (Medium Access Controller)

Stack layers. Many options on this tab are enabled or disabled based on the “MiWi

Device Type” specified on the MiWi Device tab.

Many of these options have direct correlation to the amount of RAM required by the

application. See Table 4-4 for NWK and MAC option selections.