User`s guide

ZENA™ Wireless Network Analyzer User’s Guide
DS51606C-page 60 © 2008 Microchip Technology Inc.
4.2.3 Specifying Security Information
Select the Security tab.
FIGURE 4-3: ZENA™ STACK CONFIGURATION – MiWi™ PROTOCOL
WINDOW, SECURITY TAB
Using this window, you can configure the following items:
TABLE 4-3: MiWi™ PROTOCOL SECURITY CONFIGURATION SELECTION
Configuration Option Description
Security Capable Only “Residential” mode is currently supported by the Stack.
Security Key If the network key is known, enter it here with the “Sequence Number”.
Security Level Select the IEEE “Security Level” of how the packets will be encrypted and decrypted.