User`s guide

MiWi™ Wireless Networking Protocol Tools

Using this window, you can configure the following items:

TABLE 4-1: MiWi™ PROTOCOL DEVICE CONFIGURATION SELECTION

Configuration Option Description

MAC Address Each and every MiWi™ protocol device must have its own unique MAC address.

The Microchip OUI is provided as a default for development purposes only. For additional

information, see AN1066, “MiWi™ Wireless Networking Protocol Stack”.

Receive Network Address

From Coordinator

MiWi protocol devices must always receive their network address from their parent.

Coordinator Capable If your FFD is capable of becoming a coordinator, select this option. This option is not

available for RFDs.

Cluster Sockets Select this option if your application will support cluster sockets.

EUI Address Search If your device will search for another device based on that device’s MAC address, select

this option.

IEEE Device Type Select whether your application is a Full Function Device (FFD) or a Reduced Function

Device (RFD).

Transceiver Power How the transceiver is powered. This is selected automatically based on the IEEE device

type.

Power Source Select your application’s power source.

Peer-to-Peer Capable Select this option if your application will be capable of peer-to-peer communication.

(1)

Peer-to-Peer Sockets Select this option if your application will add support to receive and process peer-to-peer

socket requests (coordinators only).

(1)

Peer-to-Peer Only Select this option to limit the device to peer-to-peer communication only.

(1)

Note 1: May not be supported in this release.