User`s guide

ZENA™ Wireless Network Analyzer User’s Guide

3.2.7 Specifying NWK and MAC Layer Information

Click on the NWK/MAC tab.

FIGURE 3-8: ZENA™ STACK CONFIGURATION WINDOW, NWK/MAC TAB

This tab is used to configure the NWK (Network) and MAC (Medium Access Controller)

Stack layers. Many options on this tab are enabled or disabled based on the “ZigBee

Device Type” specified on the ZigBee Device tab.

Many of these options have direct correlation to the amount of RAM or nonvolatile

memory required by the application. To view the associated cost in the status bar at the

bottom of the window, hold the mouse over the appropriate edit box. This feature only

functions if the edit box is enabled. See Table 3-10 and Table 3-11 for NWK and MAC

option selections.