User Manual

Table Of Contents
VDDIO = 3.3V
Temp: 25°C
Measured after RF matching network.
The following table provides the Bluetooth receiver performance characteristics for the ATWINC3400-
MR210CA module.
Table 4-6. Bluetooth Receiver Performance Characteristics
Parameter Description Min. Typ. Max. Unit
Frequency - 2,402 - 2,480 MHz
Sensitivity (ideal Tx) Bluetooth Low Energy (GFSK) - -92.5 - dBm
Maximum receive signal
level
Bluetooth Low Energy (GFSK) - -3.5 -
Interference performance
(Bluetooth Low Energy)
Co-channel - 12 dB
adjacent + 1 MHz - 0 -
adjacent - 1 MHz - 3 -
adjacent + 2 MHz(image
frequency)
- -25 -
adjacent - 2 MHz - -41 -
adjacent + 3 MHz (adjacent to
image)
- -35 -
adjacent - 3 MHz - -35 -
adjacent + 4 MHz - -45 -
adjacent - 4 MHz - -30 -
adjacent +5 MHz - -34 -
adjacent - 5 MHz - -30 -
4.5.2 Transmitter Performance
The transmitter performance is tested under following conditions:
VBAT = 3.3V
VDDIO = 3.3V
Temp: 25°C
Measured after RF matching network.
The following table provides the Bluetooth transmitter performance characteristics for the ATWINC3400-
MR210CA module.
Table 4-7. Bluetooth Transmitter Performance Characteristics
Parameter Description Min. Typ. Max. Unit
Frequency - 2,402 - 2,480 MHz
Output power Bluetooth Low Energy (GFSK) - 3.2 3.7 dBm
ATWINC3400-MR210CA
© 2017 Microchip Technology Inc.
Draft Datasheet Preliminary
DS00000000A-page 15