Product Info

Regulatory Compliance Information
Revision 0.0 (06/2020)
Preliminary
6
Immediately following the above notice, the manufacturer shall provide a list of all antenna types
approved for use with the transmitter, indicating the maximum permissible antenna gain (in dBi) and
required impedance for each.
3.1.2 RF Exposure
All transmitters regulated by ISED must comply with RF exposure requirements listed in RSS-102 - Radio
Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands).
This transmitter is restricted for use with a specific antenna tested in this application for certification, and
must not be co-located or operating in conjunction with any other antenna or transmitters within a host
device, except in accordance with Canada multi-transmitter product procedures.
The module antenna must be installed to meet the RF exposure compliance separation distance of “20
cm” and any additional testing and authorization process as required.
The host integrator installing this module into their product must ensure that the final composite product
complies with the ISED requirements by a technical assessment.
L'antenne du module doit être installé pour répondre à la conformité en matière d'exposition RF distance
de séparation de 20 "cm" et tout d'autres tests et processus d'autorisation au besoin.
L'hôte integrator l'installation de ce module dans leur produit final doit s'assurer que le produit est
conforme à la composite Exigences ISED par une évaluation technique.
3.1.3 Approved Antenna Types
Antennas approved for WFI32E01 module with the antenna types are listed in Table 1-1.
3.1.4 Helpful Web Sites
Industry Canada: http://www.ic.gc.ca/