Product Info

Regulatory Compliance Information
Revision 0.0 (06/2020)
Preliminary
4
• Consult the dealer or an experienced radio/TV technician for help
Additional information on labeling and user information requirements for Part 15 devices can be found in
KDB Publication 784748, which is available at the FCC Office of Engineering and Technology (OET)
Laboratory Division Knowledge Database (KDB) https://apps.fcc.gov/oetcf/kdb/index.cfm
2.1.2 RF Exposure
All transmitters regulated by FCC must comply with RF exposure requirements. KDB 447498 General RF
Exposure Guidance provides guidance in determining whether proposed or existing transmitting facilities,
operations or devices comply with limits for human exposure to Radio Frequency (RF) fields adopted by
the Federal Communications Commission (FCC).
From the FCC Grant: Output power listed is conducted. This transmitter is restricted for use with the
specific antenna(s) tested in this application for Certification.
In the end product, the antenna(s) used with this transmitter must be installed to provide a separation
distance of at least 8.0 cm from all persons and must not be co-located or operation in conjunction with
any other antenna or transmitter. User and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying the RF exposure compliance.
2.1.3 Approved Antenna Types
To maintain modular approval in the United States, only the antenna types that have been tested shall be
used. It is permissible to use a different antenna, provided the same antenna type and antenna gain
(equal to or less than) is used. An antenna type comprises antennas having similar in-band and out-of
band radiation patterns.
Antennas approved for WFI32E01 module with the antenna types are listed in Table 1-1.
2.1.4 Helpful Websites
Federal Communications Commission (FCC): http://www.fcc.gov
FCC Office of Engineering and Technology (OET) Laboratory Division Knowledge Database (KDB):
https://apps.fcc.gov/oetcf/kdb/index.cfm