Product Info

Regulatory Compliance Information

Revision 0.0 (06/2020)

Preliminary

This document covers the Regulatory Compliance information which

will be part of the WFI32E01 Module datasheet and related documents

shared with customers.

1.1 Antenna Considerations:

Table 1-1 provides the list of Approved antennas along with the manufacturer and part number

details.

Slno. P/N Vendor

Antenna Gain

@ 2.4GHz

Band

Antenna

type

Cable length/ Remarks

1 RFA-02-L2H1 Alead/

Aristotle

2 dBi Dipole 150mm

2 RFA-02-C2H1-D034 Alead/

Aristotle

2 dBi Dipole 150mm

3 RFA-02-D3 Alead/

Aristotle

2dBi Dipole 150mm

4 RFDPA870920IMLB301 WALSIN 1.84 dBi Dipole 200mm

5 RFDPA870920IMAB302 WALSIN 1.82 dBi Dipole 200mm/ Black

6 RFDPA870920IMAB305 WALSIN 1.82 dBi Dipole 200mm/ Grey

7 RFDPA870910IMAB308 WALSIN 2 dBi Dipole 100mm

8 RFA-02-C2M2 Alead/

Aristotle

2 dBi Dipole RP-SMA to u.FL cable length

of 100mm

(Refer note 2 and 3)

9 RN-SMA-S-RP Microchip 0.56 dBi Dipole RP-SMA to u.FL cable length

of 100mm.

(Refer note 2 and 3)

10 - Microchip 2.51 dBi PCB

(Inverted F)

Note:

1) Antenna #1 to #9 are for WFI32E01UC/ WFI32E01UE; Antenna #10 is for WFI32E01PC/ WFI32E01PE

2) If the end-product using the Module is designed to have an antenna port that is accessible to the end-

user than a unique (non-standard) antenna connector (as permissible by FCC) must be used (e.g. RP

(Reverse Polarity)-SMA socket).

3) If an RF coaxial cable is used between the module RF output and the enclosure, than a unique (non-

standard) antenna connector must be used in the enclosure wall for interface with antenna.