Datasheet

Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface
Datasheet
SMSC USB3300 59 Revision 1.1 (01-24-13)
DATASHEET
Rev. 1.05
(05-26-06)
Table 4.1 Added ESD and Latch-up entries
Section 7.4 Added Section 7.4
Cover - Features: ESD protection levels
of ±8kV HBM without external protection
devices
Removed mention of wrapper available from
SMSC (Also removed from Section 1 and 6.1.1)
Added bullets on ESD and latch-up.
USB Interrupt Status Register: Address
= 13h (read only with auto clear) on
page 29
Corrected title of section
Rev 1.04
(02-28-06)
Table 6.5, "ULPI RX CMD Encoding" Corrected CMD encoding for DATA[5:4]
USB Interrupt Status Register: Address
= 13h (read only with auto clear)
Corrected to read “Status Register” instead of
“Latch Register”
USB3300 Pin Definitions 32-Pin QFN
Package
Changed pin 31 from VCCA1.8 to REG_EN.
Changed pin description to describe REG_EN
operation
Table 8.1, "32 Terminal QFN Package
Parameters"
Updated package dimensions per SMSC
package data sheet located in SMSC
specifications database
Figure 3.1, "USB3300 Pin Diagram" Changed pin 31 in figure 3.1 to be named
“REG_EN”.
Table 5.1, "Electrical Characteristics:
Supply Pins"
Added max current information
Rev. 1.03
(05-11-05)
Table 3.1, "USB3300 Pin Definitions 32-
Pin QFN Package"
Modified description for pin 29 (wording changed
from “digital” to “analog”)
Table 6.2, "ULPI Interface Timing" Add min value to Output delay
Cover - Title Added OTG to Title
Changed to OTG version of USB logo.
Table 9.1 Customer Revision History