Datasheet
Table Of Contents
- Chapter 1 USB251x Hub Family Differences Overview
- Chapter 2 General Description
- Chapter 3 Acronyms
- Chapter 4 Block Diagram
- Chapter 5 Pin Descriptions
- Chapter 6 LED Usage Description
- Chapter 7 Battery Charging Support
- Chapter 8 Configuration Options
- Chapter 9 DC Parameters
- 9.1 Maximum Guaranteed Ratings
- 9.2 Operating Conditions
- Figure 9.1 Supply Rise Time Model
- Table 9.1 DC Electrical Characteristics (continued)
- Table 9.2 Supply Current Unconfigured: Hi-Speed Host (ICCINTHS)
- Table 9.3 Supply Current Unconfigured: Full-Speed Host (ICCINTFS)
- Table 9.4 Supply Current Configured: Hi-Speed Host (IHCH1)
- Table 9.5 Supply Current Configured: Full-Speed Host (IFCC1)
- Table 9.6 USB251x/xi/xA/xAi Supply Current Suspend (ICSBY)
- Table 9.7 USB251xB/xBi Supply Current Suspend (ICSBY)
- Table 9.8 USB251x/xi/xA/xAi Supply Current Reset (ICRST)
- Table 9.9 USB251xB/xBi Supply Current Reset (ICRST)
- Table 9.10 Pin Capacitance for USB251x, USB251xi, USB251xA, USB251xAi
- Table 9.11 Pin Capacitance for USB251xB and USB251xBi
- 9.2.1 Package Thermal Specifications
- Chapter 10 AC Specifications
- Chapter 11 Package Outlines
USB 2.0 Hi-Speed Hub Controller
Datasheet
Revision 1.1 (04-26-10) 44 SMSC USB251x
DATASHEET
8.2.1.23 Register 16h-53h: Manufacturer String
8.2.1.24 Register 54h-91h: Product String
8.2.1.25 Register 92h-CFh: Serial String
BIT
NUMBER BIT NAME DESCRIPTION
7:0 MFR_STR Manufacturer String, UNICODE UTF-16LE per USB 2.0 specification
When supported, the maximum string length is 31 characters (62 bytes).
Note: The string consists of individual 16-bit UNICODE UTF-16LE
characters. The Characters will be stored starting with the LSB at
the least significant address and the MSB at the next 8-bit location
(subsequent characters must be stored in sequential contiguous
address in the same LSB, MSB manner). Some EEPROM
programmers may transpose the MSB and LSB, thus reversing the
Byte order. Please pay careful attention to the Byte ordering or your
selected programming tools.
BIT
NUMBER BIT NAME DESCRIPTION
7:0 PRD_STR Product String, UNICODE UTF-16LE per USB 2.0 specification
When supported, the maximum string length is 31 characters (62 bytes).
Note: The string consists of individual 16-bit UNICODE UTF-16LE
characters. The Characters will be stored starting with the LSB at
the least significant address and the MSB at the next 8-bit location
(subsequent characters must be stored in sequential contiguous
address in the same LSB, MSB manner). Some EEPROM
programmers may transpose the MSB and LSB, thus reversing the
Byte order. Please pay careful attention to the Byte ordering or your
selected programming tools.
BIT
NUMBER BIT NAME DESCRIPTION
7:0 SER_STR Serial String, UNICODE UTF-16LE per USB 2.0 specification
When supported, the maximum string length is 31 characters (62 bytes).
Note: The string consists of individual 16-bit UNICODE UTF-16LE
characters. The Characters will be stored starting with the LSB at
the least significant address and the MSB at the next 8-bit location
(subsequent characters must be stored in sequential contiguous
address in the same LSB, MSB manner). Some EEPROM
programmers may transpose the MSB and LSB, thus reversing the
Byte order. Please pay careful attention to the Byte ordering or your
selected programming tools.