Datasheet

www.microchip.com/usb
USB Development Tools and Software Support
Supporting USB Development from Concept to Prototype
USB PICtail Plus Daughter Board (AC164131)
This module enables USB hardware
connectivity when using an Explorer 16 and
USB-capable PIM. Provides support for USB
Device, Host and OTG development.
Plug-in Modules
Various PIMs are available for use with
the Explorer 16 development board.
Individual PIMs feature different PIC24F,
PIC24E and PIC32 microcontrollers and
dsPIC33E digital signal controllers with
USB modules.
USB Evaluation Boards
MCP2210 Evaluation Kit (ADM00421)
The MCP2210 Evaluation Kit is
a development and evaluation
platform for the MCP2210 USB-
to-SPI stand-alone device.
USB Hub Controller Evaluation Boards
USB2514B Hi-Speed USB 2.0 Multi-TT 4-Port Hub
with Battery Charging Support (EVB-USB2514BC)
USB2514B MultiTRAK™ Hub Controller
is a low-power, full-featured, OEM
configurable Hi-Speed USB 2.0
compliant hub with four downstream
ports. Each of these downstream ports
in the USB2514B device is capable of supporting battery
charging per the USB battery charging specification.
USB3503 HSIC to USB 2.0 3-Port Hub for Portable
Applications (EVB-USB3503)
The EVB-USB3503 is used to evaluate
our extremely small size USB3503 hub,
which is ideal for mobile and portable
applications. Many processors serving
the mobile market have adopted HSIC
as a standard interface, and this solution allows for both
external USB 2.0 connectivity as well as an embedded
interface in these mobile products.
as a standard interface, and this solution allows for both
USB3803 Hi-Speed USB 2.0 3-Port Hub for Portable
Applications (EVB-USB3803)
The EVB-USB3803 is used to evaluate
our extremely small size USB3803 hub,
which is ideal for mobile and portable
applications. The USB3803 is similar
to the USB3503 with the excetion that
this device has a USB 2.0 upstream interface instead of
HSIC. Some system architects prefer to use USB 2.0, and
this solution provides an adaptable equivalent.
USB553X SuperSpeed USB 3.0 7-Port Hub
Controller (EVB-USB5537)
The EVB-USB5537 is used to evaluate the
USB553X family of SuperSpeed USB 3.0
Hub controllers. This solution is offered in
different port configurations and provides
some unique features such as PHYBoost
and VariSense to optimize USB system design. It also
incorporates battery charging detection on all downstream
USB ports.
Power Delivery and Battery Charging
Evaluation Boards
USB Port Power Controller with Charger Emulation
(EVB-UCS1002)
The EVB-UCS1002 is used to
evaluate our UCS100X USB Port
Power Controller solutions. USB
ports are used for not only USB
data, but also USB battery charging.
The UCS100X provides up to nine preloaded and one
programmable charger emulation profiles, an integrated
current sensor and a power switch. It it capable of up to
2.5A of continuous current.
Note: The UCS1002 may require an NDA.
Transceiver/Switch Evaluation Boards
USB3330 Hi-Speed USB 2.0 Transceiver with ULPI
Interface in Smallest Package (EVB-USB3330)
The EVB-USB3330 is used to evaluate
our USB333X family of small, highly-
integrated USB 2.0 transceivers with
ULPI interface. The small WLCSP
package makes the USB333X family
an ideal solution for mobile and portable applications. It
features multi-frequency reference clocks to adapt and
share any common system reference clocks, and includes
key features like RapidCharge Anywhere™, PHYBoost and
VariSense for system optimization.
this device has a USB 2.0 upstream interface instead of
7
Connectivity Solutions