Datasheet

2
TC7662B
CHARGE PUMP DC-TO-DC
VOLTAGE CONVERTER
TC7662B-8 9/11/96
© 2001 Microchip Technology Inc. DS21469A
ELECTRICAL CHARACTERISTICS: V
+
= 5V, T
A
= +25°C, OSC = Free running, Test Circuit Figure 2, Unless
Otherwise Specified.
Symbol Parameter Test Conditions Min Typ Max Unit
I
+
Supply Current (Note 3) R
L
= ∞, +25°C — 80 160 µA
(Boost pin OPEN OR GND) 0°C ≤ T
A
≤ +70°C — — 180 µA
– 40°C ≤ T
A
≤ +85°C — — 180 µA
– 55°C ≤T
A
≤ +125°C — — 200 µA
I
+
Supply Current 0°C ≤ T
A
≤ +70°C — — 300 µA
(Boost pin = V+) – 40°C ≤ T
A
≤ +85°C 350
– 55°C ≤ T
A
≤ +125°C 400
V
+
H
Supply Voltage Range, High R
L
= 10 kΩ, LV Open, T
MIN
≤ T
A
≤ T
MAX
3.0 — 15 V
(Note 4)
V
+
L
Supply Voltage Range, Low R
L
= 10 kΩ, LV to GND, T
MIN
≤ T
A
≤ T
MAX
1.5 — 3.5 V
R
OUT
Output Source Resistance I
OUT
= 20mA, 0°C ≤ T
A
≤ +70°C — 65 100 Ω
I
OUT
= 20mA, – 40°C ≤ T
A
≤ +85°C — — 120 Ω
I
OUT
= 20mA, – 55°C ≤ T
A
≤ +125°C — — 150 Ω
I
OUT
= 3mA, V
+
= 2V, LV to GND , — — 250 Ω
0°C ≤ T
A
≤ +70°C
I
OUT
= 3mA, V
+
= 2V, LV to GND , — — 300 Ω
– 40°C ≤ T
A
≤ +85°C
I
OUT
= 3mA, V
+
= 2V, LV to GND , — — 400 Ω
– 55°C ≤ T
A
≤ +125°C
f
OSC
Oscillator Frequency C
OSC
= 0,Pin 1 Open or GND 5 10 — kHz
Pin 1 = V
+
35
P
Eff
Power Efficiency R
L
= 5kΩ 96 96 — %
T
MIN
≤ T
A
≤ T
MAX
95 97
V
OUT
Eff Voltage Conversion Efficiency R
L
= ∞ 99 99.9 — %
Z
OSC
Oscillator Impedance V
+
= 2V — 1 — MΩ
V
+
= 5V — 100 — kΩ
NOTES:
1. Connecting any terminal to voltages greater than V+ or less than GND may cause destructive latch-up. It is recommended that no inputs from
sources operating from external supplies be applied prior to “power up” of the TC7662B.
2. Derate linearly above 50°C by 5.5 mW/°C.
3. In the test circuit, there is no external capacitor applied to pin 7. However, when the device is plugged into a test socket, there is usually a very
small but finite stray capacitance present, of the order of 5pF.
4. The TC7662B can operate without an external diode over the full temperature and voltage range. This device will function in existing designs which
incorporate an external diode with no degradation in overall circuit performance.
ABSOLUTE MAXIMUM RATINGS*
Supply Voltage ...................................................... +16.5V
LV, Boost and OSC Inputs Voltage (Note 1)
V+<5.5V..................................... – 0.3V to (V
+
+ 0.3V)
>5.5V .................................. (V
+
– 5.5V) to (V
+
+ 0.3V)
Current Into LV (Note 1)
V
+
>3.5V ............................................................ 20µA
Output Short Duration
(V
SUPPLY
≤ 5.5V) ....................................... Continuous
Power Dissipation (T
A
≤ 70°C) (Note 2)
Plastic DIP ......................................................730mW
SO ..................................................................470mW
Operating Temperature Range
C Suffix ..................................................0°C to +70°C
E Suffix ............................................. – 40°C to +85°C
Storage Temperature Range ................ – 65°C to +150°C
Lead Temperature (Soldering, 10 sec) ................. +300°C
* Static-sensitive device. Unused devices must be stored in conductive
material. Protect devices from static discharge and static fields. Stresses
above those listed under "Absolute Maximum Ratings" may cause perma-
nent damage to the device. These are stress ratings only and functional
operation of the device at these or any other conditions above those
indicated in the operation sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods
may affect device reliability.