Datasheet

 2002-2013 Microchip Technology Inc. DS20001420F-page 3
TC4421/TC4422
1.0 ELECTRICAL
CHARACTERISTICS
Absolute Maximum Ratings†
Supply Voltage .....................................................+20V
Input Voltage .................... (V
DD
+ 0.3V) to (GND – 5V)
Input Current (V
IN
>V
DD
)...................................50 mA
Package Power Dissipation (T
A
 70°C)
5-Pin TO-220....................................................1.6W
DFN-S .......................................................... Note 2
PDIP ............................................................730 mW
SOIJ ............................................................750 mW
Package Power Dissipation (T
A
 25°C)
5-Pin TO-220 (with heatsink)..........................12.5W
Thermal Impedances (to case)
5-Pin TO-220 R
J-C
......................................10°C/W
† Notice: Stresses above those listed under “Absolute
Maximum Ratings” may cause permanent damage to
the device. These are stress ratings only and functional
operation of the device at these or any other conditions
above those indicated in the operation sections of the
specifications is not implied. Exposure to Absolute
Maximum Rating conditions for extended periods may
affect device reliability.
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise noted, T
A
= +25°C with 4.5V  V
DD
 18V.
Parameters Sym Min Typ Max Units Conditions
Input
Logic ‘1’, High-Input Voltage V
IH
2.4 1.8 — V
Logic ‘0’, Low-Input Voltage V
IL
—1.30.8V
Input Current I
IN
–10 — +10 µA 0V  V
IN
 V
DD
Output
High-Output Voltage V
OH
V
DD
– 0.025 — — V DC test
Low-Output Voltage V
OL
— — 0.025 V DC test
Output Resistance, High R
OH
—1.4— I
OUT
=10mA, V
DD
= 18V
Output Resistance, Low R
OL
—0.91.7 I
OUT
=10mA, V
DD
= 18V
Peak Output Current I
PK
—9.0—AV
DD
=18V
Continuous Output Current I
DC
2 — — A 10V  V
DD
 18V, T
A
=+25°C
(TC4421/TC4422 CAT only) (Note 3)
Latch-Up Protection
Withstand Reverse Current
I
REV
— > 1.5 — A Duty cycle  2%, t  300 µsec
Switching Time (Note 1)
Rise Time t
R
—6075nsFigure 4-1, C
L
=10,000pF
Fall Time t
F
—6075nsFigure 4-1, C
L
=10,000pF
Delay Time t
D1
—3060nsFigure 4-1
Delay Time t
D2
—3360nsFigure 4-1
Power Supply
Power Supply Current I
S
—0.21.5mAV
IN
=3V
—55150µAV
IN
=0V
Operating Input Voltage V
DD
4.5 — 18 V
Note 1: Switching times ensured by design.
2: Package power dissipation is dependent on the copper pad area on the PCB.
3: Tested during characterization, not production tested.