User manual

XC8 Command-line Driver
 2012 Microchip Technology Inc. DS52053B-page 129
4.10.3.3 ADDITIONAL
These options, shown in Figure 4-15 relate to miscellaneous options.
1. Fill: This field allows a fill value to be specified for unused memory locations, see
Section 4.8.30 “--FILL: Fill Unused Program Memory”.
2. Serial: This option allows you to specify a string which can be inserted into your
output HEX file. See Section 4.8.52 “--SERIAL: Store a Value At This Pro-
gram Memory Address”.
3. Codeoffset: This field allows an offset for the program to be specified, see
Section 4.8.22 “--CODEOFFSET: Offset Program Code to Address”.
4. Checksum: This field allows the checksum specification to be specified, see
Section 4.8.19 “--CHECKSUM: Calculate a Checksum”.
5. Errata: This allows customization of the errata workarounds applied by the
compiler, see Section 4.8.27 “--ERRATA: Specify Errata Workarounds”.
6. Trace type: Not yet implemented. Only native trace supported.
Extend address 0 in HEX file: This option specifies that the intel HEX file should have
initialization to zero of the upper address, see Section 4.8.44 “--OUTPUT= type:
Specify Output File Type”.