Datasheet

 2013-2016 Microchip Technology Inc. DS20005218E-page 69
SST26VF032B / SST26VF032BA
206H
A16
FDH
OTP Capable (Security ID) Supported
0: not supported
1: supported
A17
Supports Block Group Protect
0: not supported
1: supported
A18
Supports Independent Block Protect
0: not supported
1: supported
A19
Supports Independent non Volatile Lock (Block or Sector becomes
OTP)
0: not supported
1: supported
A23:A20 Reserved. Bits default to all 1’s.
207H A31:A24 FFH Reserved. Bits default to all 1’s.
208H A7:A0 30H V
DD
Minimum Supply Voltage
2.3V (F270H)
209H A15:A8 F2H
20AH A23:A16 60H V
DD
Maximum Supply Voltage
3.6V (F360H)
20BH A31:A24 F3H
20CH A7:A0 32H
Typical time out for Byte-Program: 50 µs
Typical time out for Byte Program is in µs. Represented by conversion of
the actual time from the decimal to hexadecimal number.
20DH A15:A8 FFH Reserved. Bits default to all 1’s.
20EH A23:A16 0AH Typical time out for page program: 1.0ms (xxH*(0.1ms)
20FH A31:A24 12H
Typical time out for Sector-Erase/Block-Erase: 18 ms
Typical time out for Sector/Block-Erase is in ms. Represented by conversion
of the actual time from the decimal to hexadecimal number.
210H A7:A0 23H
Typical time out for Chip-Erase: 35 ms
Typical time out for Chip-Erase is in ms. Represented by conversion of
the actual time from the decimal to hexadecimal number.
211H A15:A8 46H
Max. time out for Byte-Program: 70 µs
Typical time out for Byte Program is in µs. Represented by conversion of
the actual time from the decimal to hexadecimal number.
212H A23:A16 FFH Reserved. Bits default to all 1’s.
213H A31:A24 0FH
Max time out for Page-Program: 1.5ms.
Typical time out for Page Program in xxH * (0.1ms) ms
214H A7:A0 19H
Max. time out for Sector Erase/Block Erase: 25ms.
Max time out for Sector/Block Erase in ms
215H A15:A8 32H
Max. time out for Chip Erase: 50ms.
Max time out for Chip Erase in ms.
216H A23:A16 0FH
Max. time out for Program Security ID: 1.5 ms
Max time out for Program Security ID in xxH*(0.1ms) ms
217H A31:A24 19H
Max. time out for Write-Protection Enable Latency: 25 ms
Max time out for Write-Protection Enable Latency is in ms. Represented by con-
version of the actual time from the decimal to hexadecimal number.
218H A23:A16 19H
Max. time Write-Suspend Latency: 25 µs
Max time out for Write-Suspend Latency is in µs. Represented by conversion of
the actual time from the decimal to hexadecimal number.
219H A31:A24 FFH
Max. time to Deep Power-Down
0FFH = Reserved
TABLE 11-1: SERIAL FLASH DISCOVERABLE PARAMETER (SFDP) (CONTINUED) (12 OF 16)
Address Bit Address Data Comments