Datasheet

©2011 Silicon Storage Technology, Inc. DS25071A 12/11
27
32 Mbit SPI Serial Flash
SST25VF032B
Data Sheet
A
Microchip Technology Company
Power-Up Specifications
All functionalities and DC specifications are specified for a V
DD
ramp rate of greater than 1V per 100
ms (0v - 3.0V in less than 300 ms). See Table 14 and Figure 25 for more information.
Figure 25: Power-up Timing Diagram
Table 14: Recommended System Power-up Timings
Symbol Parameter Minimum Units
T
PU-READ
1
1. This parameter is measured only for initial qualification and after a design or process change that could affect this
parameter.
V
DD
Min to Read Operation 100 µs
T
PU-WRITE
1
V
DD
Min to Write Operation 100 µs
T14.0 25071
Time
V
DD
Min
V
DD
Max
V
DD
Device fully accessible
T
PU-READ
T
PU-WRITE
Chip selection is not allowed.
All commands are rejected by the device.
1327 F26.0