Datasheet

©2013 Silicon Storage Technology, Inc. DS20005054C 04/13
11
2 Mbit SPI Serial Flash
SST25VF020B
Data Sheet
Read (33 MHz)
The Read instruction, 03H, supports up to 33 MHz Read. The device outputs the data starting from the
specified address location. The data output stream is continuous through all addresses until termi-
nated by a low to high transition on CE#. The internal address pointer will automatically increment until
the highest memory address is reached. Once the highest memory address is reached, the address
pointer will automatically increment to the beginning (wrap-around) of the address space. Once the
data from address location 3FFFFH has been read, the next output will be from address location
000000H.
The Read instruction is initiated by executing an 8-bit command, 03H, followed by address bits [A
23
-
A
0
]. CE# must remain active low for the duration of the Read cycle. See Figure 5 for the Read
sequence.
Figure 5: Read Sequence
1417 ReadSeq.0
CE#
SO
SI
SCK
ADD.
012345678
ADD. ADD.
03
HIGH IMPEDANCE
15 16
23
24
31
32
39
40
7047 48 55 56 63 64
N+2 N+3 N+4N N+1
D
OUT
MSB
MSB
MSB
MODE 0
MODE 3
D
OUT
D
OUT
D
OUT
D
OUT