User's Manual

PROJECT SPECIFICATION
1. Build System
1.1 Components for set up
The components in Table 1-1 are necessary to perform all functions of the SmartPlug.
Table 1-1. Components for kit setup
Component
Function
SmartPlug Kit
SmartPlug assembled with Power Supply Board, MCU Control
Board, and Touch Board
Running at the 110V/220VAC and 50/60Hz frequency
Supply AC Power to other equipment by ON/OFF by Local Touch
Button or WIFI via APP
WiFi Router
Communicate between the Tablet or Smartphone and SmartPlug
Kit
Tablet or Smartphone based on the Android
System
Control the kit using APP
APP
The APK for SmartPlug runs in the 4.2 or above version of the
Android System
1.2 Power supply
The kit is powered from an AC line in the voltage range 85VAC and 264VA with 50/60Hz frequency. It can supply max
10A current to other equipment by Output Socket.
1.3 LED Indication
On the kit, there have two LEDs Green/Red to indicate the ON/OFF Power status, and three LEDs Green/Red/Yellow to
indicate the Wi-Fi working status of the kit.