APP USER GUIDER Smart Plug with Wi-Fi Confidentiality Rev. Date Description Owner 0.
Table of Contents 1. Build System ...................................................................................... 3 1.1 1.2 1.3 1.4 Components for set up ...................................................................................... 3 Power supply..................................................................................................... 3 LED Indication ...................................................................................................
1. Build System 1.1 Components for set up The components in Table 1-1 are necessary to perform all functions of the SmartPlug. Table 1-1. 1.
Table 1-2.
1.4 Build the connection between the Tablet or Smartphone and SmartPlug 1.4.1 Install the Atmel APK for SmartPlug on the Tablet or Smartphone based on the 4.2 or above version Android System.
1.4.2 Connect the Tablet or Smartphone to the used the Wi-Fi Router via Wi-Fi. 1.4.3 Power on the SmartPlug kit, touch the touch button more than 5s, the device run into the STA mode, and the Green LED blink. Open the APP on the Tablet or Smartphone.
1.4.4 Touch the “ ” and “ 1.4.5 Find the new equipment and touch it “ ” to add the SmartPlug to the system ” to configure the connection.
PROJECT SPECIFICATION
PROJECT SPECIFICATION
1.4.6 Touch the “ ” to choose the connected the used WLAN by Tablet or Smartphone, and input the password of the WLAN, and then touch the “ control system. If the add the device success, it will show “ ” to add the device to the ” at the my device page.
1.4.7 Touch the added device, “ ”, and run into the operating interface to obtain the parameters of the SmartPlug, also can touch the ON/OFF “ control the SmartPlug ON/OFF.
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
