User's Manual

Default: RN4020
Example: SDM,RN4020
3.2.1.8 SDN,<text>
This command set the value of manufactory name characteristics in Device
Information Service.
Default: Microchip
Example: SDN,Microchip
3.2.1.9 SDP,<text>
This command set the value of PnP ID characteristics in Device Information Service.
Default: N/A
Example: SDP,N/A
3.2.1.10 SDR,<text>
This command set the value of software revision characteristics in Device
Information Service.
Default: 1.0
Example: SDR,1.0
3.2.1.11 SDS,<text>
This command set the value of serial number characteristics in Device Information
Service.
Default: N/A
Example: SDS,12345678
3.2.1.12 SF,<1,2>
This command reset the configurations into factory default. The parameter of this
command could be 1 or 2.