User's Manual

WiFly GSX
www.rovingnetworks.com WiFlyRN171-um 2/23/2011
809 University Avenue • Los Gatos, CA 95032 •Tel [phone] •[e-mail]
~64~
• There are new levels of print out diagnosticsthat can be enabled/disable with the sys print variable.
Refer section 10.6for more deails
• Ability to add prefix to HTML client post, specifically the ability to append&id= and&rtc=in the
HTML message. Please refer section 錯誤! 找不到參照來源。 for more details.
As of Version 2.19 3/05/2009
Fixes
• Improved performance of the UART receiver. UART is now reliable at up to 460Kpbs with RTS
flow control.
Features
• Created UART data trigger mode, which will automatically make a TCP/HTTP connection based
on received UART data. setuart mode 2 to enable this mode.
• Added timestamping option to both UDP and TCP packets. 8 byte RTC counter is appended.
• DHCP client now inserts the DEVICEID string into the HOST name when requesting a DHCP
lease. This string is displayed by most routers and DHCP servers in their lease tables.
• show nncommand returns the MAC Address of the Access Point currently associated.
• get i a command returns only the IP address of the WiFly.
• show network added a response “Boot=<time in ms>” which displays the total time in milliseconds
that was required to be ready on the network (associate and get IP address).This time is also added to
the UDP broadcast packet at byte location 92.
• Added a number of HTTP commands for posting data to a webserver see Section 12.
As of Version 2.15 10/15/2009