User's Manual

WiFly GSX
www.rovingnetworks.com WiFlyRN171-um 2/23/2011
809 University Avenue • Los Gatos, CA 95032 •Tel [phone] •[e-mail]
~58~
4 3.3V output of on board regulator
Example: To set the power to 1.2V automatically upon power up, the
command would be set q power 0x20. To set sensor power to 1.2V when
sampling event occurs, the command is set q power 0x02
Example: To set the power to 3.3V automatically upon power up, the
command would be set q power 0x40. To set sensor power to 3.3V when
sampling event occurs, the command is set q power 0x04
ON BOARD TEMPERATURE OPTION (RN-121 TEMP)
show q t
The return values are the format: T=207\r\n this would be 20.7° C.
show q t 1 enables automatic sampling and output once per second.
show q t 0 turns off automatic sampling and output of temperature.