User's Manual

WiFly GSX
www.rovingnetworks.com WiFlyRN171-um 2/23/2011
809 University Avenue • Los Gatos, CA 95032 •Tel [phone] •[e-mail]
~23~
0 Turn off the sensor power
1 GROUND the sensor pin
2 1.2V internal regulated reference
3 VBATT input pin
4 3.3V output of on board regulator
Example: To set the power to 1.2V automatically upon power up, the
command would be set q power 0x20. To set sensor power to 1.2V when
sampling event occurs, the command is set q power 0x02
Example: To set the power to 3.3V automatically upon power up, the
command would be set q power 0x40. To set sensor power to 3.3V when
sampling event occurs, the command is set q power 0x04
6. Get Commands
These commands begin with “get”. They display the current values.
get adhoc display all adhoc settings.
get broadcast will display the broadcast UPD address, port and interval
get everything displays all configuration settings, useful for debug.
get com display comm. settings.
getdns display DNS settings.
get ftp display FTP settings.
getip<a> display IP address and port number settings. Optional parameter just returns the
current IP address value.
get mac display the device MAC address.
get option display the option settings like device ID
get q display the sensor settings (sensor mask and sensor power settings)
get sys display system settings, sleep, wake timers, etc.
get time display the time server UDP address and port number.
getwlan display the ssid, chan, and other wlan settings.