User's Manual

Programming Your Laser Bar Code Scanner
Basic Functions
The Scanner can be customized to suit your needs. You can use the bar codes below to turn on or off the audible
beep, clear the memory, or return the scanner to its factory default settings.
Enable All Beeps Disable All Beeps
* Factory default settings
Advanced Functions
The Scanner can be used in many legacy systems by programming it to be compatible with the settings for those
systems. The following advanced settings allow you to change the default data format. For more information on
these and other features of the scanner contact the seller.
Enable AIM Code Disable AIM Code*
Laser Safety
This device employs a laser. Do not remove the
cover or attempt to service this device due to the
possibility of eye damage.
Laser-Sicherhelt
In das Gerät ist ein Laser eingebaut. Nehmen Sie
die Abdeckung nicht ab und versuchen Sie nicht,
das Gerät zu reparieren. Es besteht die Gefahr
einer Augenverletzung.
Caution
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous laser radiation exposure.
Warnung
Die Vornahme von Regelungen oder Einstellungen
oder die Durchführung von Verfahren, die nicht in
diesem Dokument angegeben sind, kann eine
gefährliche Einwirkung von Laserstrahlung zur
Forge haben.
CLASS 1 LASER PRODUCT
PRODOTTO AL LASER DI CLASSE 1
KLASSE 1 LASERPRODUKT
LASERPRODUKT KLASSE 1
LUOKKA 1 LASERTUOTE
PRODUTO LASER DA CLASSE 1
PRODUIT LASER DE CLASSE 1
PRODUCTO LASER DE LA CLASE 1
LASERPRODUKT DER KLASSE 1
LASERPRODUKT KLASS 1
Technical Specifications
Bar Codes Supported UPC/EAN/JAN, Code 128,
Code 39, ITF, and optional -
RSS-14 and RSS-Limited
Minimum X Dimension 7.5 mil
Depth of Field 2.5 in to 5.5 in for 10 mil
2.5 in to 6 in for 13 mil
3 in to 7 in for 17 mil
Memory Capacity Approximately 500 UPC bar
codes (optional 4000)
Radio Specifications* Bluetooth class 2, v2.0
compliant
Range* 10 m., 33 ft., line-of-sight
Cable RS-232 compatible, DB9 to
Stereo plug
Indicators Visual and Audible
Operating Temperature 5º to 35º C
Storage Temperature -40º to 70º C
Power 3 AAA Alkaline Batteries
Safety EN60950-1:2002,
EN60825-1:1994 +A1:2002
+A2:2001
EMC EN300328-1:1997*,
EN301489-1:2000*,
EN301489-17:2000*,
EN55022:1998,
EN55024:1998, EN61000-4-2:
1995, EN61000-4-3:1997, FCC
47 CFR, Part 15 Class B
*Cordless Scanner only
Accessories
Model
Accessory Number
Cordless Bluetooth USB
Base Station BT-2141-02
Universal Holster HS 2120-02
Cordless Protective Boot HS 2141-01
USB Cable Adapter HS 2120-04
Serial Cable HS 2120-05
Laser light
is emitted
from this
aperture
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
COMPLIES WITH 21 CFR 1040.10 & 1040.11
EXCEPT FOR DEVIATIONS PURSUANT TO
LASER NOTICE NO.50. DATED JULY 26, 2001
CLASS 1 LASER PRODUCT
MICROVISION, INC.
19910 NORTH CREEK PARKWAY
BOTHELL, WA 98011
MADE IN INDONESIA
PATENTS PENDING
MODEL HS21XX
Clear Bar Codes Return to Factory Defaults
[BAR CODE]
SN XXXX XXXX XXXX
MANUFACTURED YYYY/MM/DD
Regulatory & Safety Information
UL Listed to U.S. and Candadian Safety Standards
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference (2) this device
must accept any interference received including interference
that may cause undesired operations. This applies to all
product options.
FCC Radio Frequency Interference Statement
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
» Reorient or relocate the receiving antenna.
» Increase the separation between the equipment and
receiver
» Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
» Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Changes or modifications to this equipment not
expressly approved by Manufacturer could void the user's
authority to operate this equipment.
Notice for Canada
Radio Interference Notice for Canada
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme á la
norme NMB-003 du Canada.
Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated July 26,
2001.
Laser
Type: Semiconductor laser AlGaInP
Maximum output power: 5mW
Divergence: X axis: 6-15 degrees
Y axis: 22-38 degrees
Wavelength: 650-660nm
Laser
Typ: Halbleiterlaser AlGaInP
Ausgabeleistung: 5 mW
Strahlabweichung: X Achse: 6-15 Grad
Y Achse: 22-38 Grad
Wellenlänge: 650-660nm
Compliance Information
Product Name: Laser Bar Code Scanner
Product Number: HS 2122, HS 2123 Options: All
The product herewith complies with the requirements of Low
Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC,
WEEE Directive 2002/96/EC, and carries the "CE" mark
accordingly.
Product Name: Cordless Laser Bar Code Scanner
Product Number: HS 2142, HS 2144 Options: All
The product herewith complies with the requirements of
R&TTE Directive 99/5/EC, WEEE Directive 2002/96/EC, and
carries the "CE" mark accordingly. The equipment also carries
the Class 2 equipment identifier:
To comply with FCC RF exposure compliance requirements, a
separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons. This
transmitter must not be collocated or operating in
conjunction with any other antenna or transmitter.
Disposal
Do not dispose of this product in unsorted municipal waste.
To dispose of this product, contact seller.

To comply with FCC RF exposure compliance requirements, this 
transmitter must not be colocated or operating in conjunction with 
any other antenna or transmitter.