Datasheet

!
www.rovingnetworks.com 16
RN-ISP-UM-1.1
NOTE: If all ports from COM1 through COM10 are in use, follow the instructions in the COM port reset application
note to clear out the COM ports. The application note is available on the Roving Networks Documentation &
Resources web page at http://www.rovingnetworks.com/resources/show/.
To run the flash loader utility on a Windows PC, perform the following steps:
1. Open a command prompt window.
2. Change to the flash_load_32 directory.
3. Ensure that the binary image file you want to load is in the same directory.
4. Type flash_load –d /dev/com<number> -i <binary file name> -f <cr>.
The binary image is loaded into the flash memory. See Figure 16.
Figure 16. Loading the Binary Image to Flash
!
!