User manual

RN-52-EK-UG
www.rovingnetworks.com Version 1.0 1/27/13 page 3
Advanced Information
1.0 OVERVIEW
This document describes the hardware and software setup for the Roving Networks RN-52-EK
evaluation kit. This kit contains the hardware you need to evaluate the RN52 Bluetooth audio
module. The RN52 module is mounted to an evaluation board that demonstrates the module’s
key features. The board contains:
Dual-channel audio output and input
Easy access to GPIO pins
Built-in amplifier for stereo audio output
6 pushbuttons to control audio playback
•Status LEDs
Connections for the programmer and UART interfaces
The RN52 supports the following Bluetooth profiles:
A2DP stereo audio (sink mode with an SBC CODEC)
AVRCP media player remote control
HFP/HSP for accepting a phone call from a mobile phone
SPP (allows the module to receive serial data over the UART)
iAP profile discovery for iOS devices
You use the evaluation kit to configure and program the Bluetooth module using the command
interface, create connections, and transfer data. The command interface is made up of simple
ASCII commands. See “Resources & Related Documents” on page 12 for information on avail-
able documentation.
2.0 EVALUATION KIT DESCRIPTION
The evaluation kit includes the hardware required to connect the evaluation board to your com-
puter. See Table 2-1. To evaluate the module on the evaluation board, you need a computer with
a USB port running the Microsoft Windows or Mac OS-X operating system.
Figure 1-1 provides the RN-52-EK evaluation board and pin information.
Note: Before beginning your evaluation, you may need to install the driver for the USB
cable. You can download the driver (as well as other tools and utilities) from the Rov-
ing Networks website at http://www.rovingnetworks.com/support.php.
TABLE 2-1: EVALUATION KIT CONTENTS
Hardware Description
Evaluation board Contains the Bluetooth module and connectors.
Mini-USB cable Links your computer to the evaluation board.
Stereo mini-speakers USB powered speakers.
RN52 samples Kit includes two sample RN52 modules.