Datasheet

PICkit™ SERIAL SPI DEMO

BOARD USER’S GUIDE

Chapter 1. Product Overview

1.1 INTRODUCTION

The PICkit™ Serial SPI Demo Board demonstrates SPI serial communications and

operation of the following devices:

• 25LC020A - 2K SPI Bus Serial EEPROM

• TC77-5.0 - Thermal Sensor with SPI Interface

• MCP3201 - 2.7V 12-Bit A/D Converter with SPI Serial Interface

• MCP4822 - 12-Bit DAC with Internal V

REF

and SPI Interface

• MCP41010 - Single/Dual Digital Potentiometer with SPI Interface

• MCP6S92 - Single-Ended, Rail-to-Rail I/O, Low-Gain PGA

• MCP23S08 - 8-Bit I/O Expander with Serial Interface

The PICkit™ Serial SPI Demo Board was designed to easily connect to the PICkit

Serial Analyzer (DV164122). The PICkit Serial Analyzer provides the SPI master mode

serial communications and power. The PICkit™ Serial SPI Demo Board devices all

operate in the SPI slave mode and can easily be connected to virtually any demo or

development board by connecting the communications lines to connector P1.

1.2 HIGHLIGHTS

This chapter discusses:

• SPI Serial Communications

• SPI Demo Board Operation

• SPI Demo Board Devices

FIGURE 1-1: PICkit™ Serial SPI Demo Board.