Datasheet

PIC32MX5XX/6XX/7XX
DS60001156H-page 436  2009-2013 Microchip Technology Inc.
Revision H (March 2013)
This revision includes the following global updates:
• Where applicable, control register tables have
been added to the document
• All references to V
CORE were removed
• All occurrences of XBGA have been updated to:
TFBGA
• All occurrences of V
USB have been updated to:
VUSB3V3
This revision also includes minor typographical and
formatting changes throughout the data sheet text.
All other significant changes are referenced by their
respective section in Table B-6.
TABLE B-6: MAJOR SECTION UPDATES
Section Name Update Description
“32-bit Microcontrollers (up to
512 KB Flash and 128 KB
SRAM) with Graphics
Interface, USB, CAN, and
Ethernet”
Updated Core features.
Added the VTLA to the Packages table.
Added Note 5 to the Feature tables (see Table 1, Table 2 , and Table 3).
Section 2.0 “Guidelines for
Getting Started with 32-bit
MCUs”
The Recommended Minimum Connection was updated (see Figure 2-1).
Section 5.0 “Flash Program
Memory”
A note regarding Flash page size and row size was added.
Section 8.0 “Oscillator
Configuration”
The RP resistor was added and Note 1 was updated in the Oscillator Diagram
(see Figure 8-1).
Section 31.0 “Electrical
Characteristics”
Added Note 1 to Operating MIPS vs. Voltage (see Table 31-1).
Added the VTLA package to Thermal Packaging Characteristics (see Table 31-3).
Added Note 2 to DC Temperature and Voltage Specifications (see Table 31-4).
Updated Note 2 in the Operating Current DC Characteristics (see Table 31-5).
Updated Note 1 in the Idle Current DC Characteristics (see Table 31-6).
Updated Note 1 in the Power-Down Current DC Characteristics (see Table 31-7).
Updated the I/O Pin Output Specifications (see Table 31-9).
Added Note 2 to the BOR Electrical Characteristics (see Table 31-10).
Added Note 3 to the Comparator Specifications (see Table 31-13).
Parameter D320 (V
CORE) was removed (see Table 31-15).
Updated the Minimum value for parameter OS50 (see Table 31-18).
Parameter SY01 (T
PWRT) was removed (see Table 31-22).
Note 1 was added and the conditions for parameters ET3, ET4, ET7, and ET9
were updated in the Ethernet Module Specifications (see Table 31-35).
Added Note 6 to the ADC Module Specifications (see Table 31-36).
Added Note 3 to the 10-bit ADC Conversion Rate Parameter (see Table 31-37).
Added Note 4 to the Analog-to-Digital Conversion Timing Requirements (see
Table 31-38).
The following figures were added:
• Figure 31-19: “MDIO Sourced by the PIC32 Device”
• Figure 31-21: “Transmit Signal Timing Relationships at the MII”
• Figure 31-22: “Receive Signal Timing Relationships at the MII”