Datasheet

 2009-2013 Microchip Technology Inc. DS60001156H-page 197
PIC32MX5XX/6XX/7XX
13.0 TIMER1
This family of PIC32 devices features one synchronous/
asynchronous 16-bit timer that can operate as a free-run-
ning interval timer for various timing applications and
counting external events. This timer can also be used
with the low-power Secondary Oscillator (S
OSC) for
Real-Time Clock (RTC) applications. The following
modes are supported:
• Synchronous Internal Timer
• Synchronous Internal Gated Timer
• Synchronous External Timer
• Asynchronous External Timer
13.1 Additional Supported Features
• Selectable clock prescaler
• Timer operation during Idle and Sleep mode
• Fast bit manipulation using CLR, SET and INV
registers
• Asynchronous mode can be used with the S
OSC
to function as a Real-Time Clock (RTC)
A simplified block diagram of the Timer1 module is
illustrated in Figure 13-1.
FIGURE 13-1: TIMER1 BLOCK DIAGRAM
Note 1: This data sheet summarizes the features
of the PIC32MX5XX/6XX/7XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 14. “Timers”
(DS60001105) in the “PIC32 Family
Reference Manual”, which is available
from the Microchip web site
(www.microchip.com/PIC32).
2: Some registers and associated bits
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization” in
this data sheet for device-specific register
and bit information.
ON (T1CON<15>)
Sync
SOSCI
SOSCO/T1CK
PR1
T1IF
Equal
16-bit Comparator
TMR1
Reset
SOSCEN
(1)
Event Flag
1
0
TSYNC (T1CON<2>)
TGATE (T1CON<7>)
TGATE (T1CON<7>)
PBCLK
1
0
TCS (T1CON<1>)
Gate
Sync
TCKPS<1:0>
Prescaler
2
1, 8, 64, 256
x 1
1 0
0 0
Q
QD
(T1CON<5:4>)
Note 1: The default state of the SOSCEN (OSCCON<1>) during a device Reset is controlled by the FSOSCEN bit in
Configuration Word, DEVCFG1.