Datasheet

 2009-2013 Microchip Technology Inc. DS60001156H-page 177
PIC32MX5XX/6XX/7XX
REGISTER 11-3: U1OTGSTAT: USB OTG STATUS REGISTER
Bit
Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
23:16
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
15:8
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
7:0
R-0 U-0 R-0 U-0 R-0 R-0 U-0 R-0
ID —LSTATE— SESVD SESEND — VBUSVD
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-8 Unimplemented: Read as ‘0’
bit 7 ID: ID Pin State Indicator bit
1 = No cable is attached or a “type B” cable has been inserted into the USB receptacle
0 = A “type A” OTG cable has been inserted into the USB receptacle
bit 6 Unimplemented: Read as ‘0’
bit 5 LSTATE: Line State Stable Indicator bit
1 = USB line state (SE0 (U1CON<6> and JSTATE (U1CON<7>) has been stable for the previous 1 ms
0 = USB line state (SE0 (U1CON<6> and JSTATE (U1CON<7>) has not been stable for the previous 1 ms
bit 4 Unimplemented: Read as ‘0’
bit 3 SESVD: Session Valid Indicator bit
1 =V
BUS voltage is above Session Valid on the A or B device
0 =VBUS voltage is below Session Valid on the A or B device
bit 2 SESEND: B-Device Session End Indicator bit
1 =VBUS voltage is below Session Valid on the B device
0 =V
BUS voltage is above Session Valid on the B device
bit 1 Unimplemented: Read as ‘0’
bit 0 VBUSVD: A-Device V
BUS Valid Indicator bit
1 =V
BUS voltage is above Session Valid on the A device
0 =VBUS voltage is below Session Valid on the A device