Datasheet

PIC32MX1XX/2XX
DS61168E-page 316 Preliminary  2011-2012 Microchip Technology Inc.
Revision D (February 2012)
All occurrences of VUSB were changed to: VUSB3V3. In
addition, text and formatting changes were
incorporated throughout the document.
All other major changes are referenced by their
respective section in Tabl e A- 3.
TABLE A-3: MAJOR SECTION UPDATES
Section Update Description
“32-bit Microcontrollers (up to 128
KB Flash and 32 KB SRAM) with
Audio and Graphics Interfaces, USB,
and Advanced Analog”
Corrected a part number error in all pin diagrams.
Updated the DMA Channels (Programmable/Dedicated) column in the
PIC32MX1XX General Purpose Family Features (see Table 1).
1.0 “Device Overview” Added the TQFP and VTLA packages to the 44-pin column heading and
updated the pin numbers for the SCL1, SCL2, SDA1, and SDA2 pins in the
Pinout I/O Descriptions (see Table 1-1).
7.0 “Interrupt Controller” Updated the Note that follows the features.
Updated the Interrupt Controller Block Diagram (see Figure 7-1).
29.0 “Electrical Characteristics” Updated the Maximum values for parameters DC20-DC24, and the Minimum
value for parameter DC21 in the Operating Current (IDD) DC Characteristics
(see Table 29-5).
Updated all Minimum and Maximum values for the Idle Current (IIDLE) DC
Characteristics (see Table 29-6).
Updated the Maximum values for parameters DC40k, DC40l, DC40n, and
DC40m in the Power-down Current (I
PD) DC Characteristics (see Table 29-7).
Changed the minimum clock period for SCKx from 40 ns to 50 ns in Note 3 of
the SPIx Master and Slave Mode Timing Requirements (see Table 29-26
through Table 29-29).
30.0 “DC and AC Device
Characteristics Graphs”
Updated the Typical IIDLE Current @ VDD = 3.3V graph (see Figure 30-5).