Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS61168E-page 283
PIC32MX1XX/2XX
TABLE 29-39: CTMU CURRENT SOURCE SPECIFICATIONS
DC CHARACTERISTICS Standard Operating Conditions (see Note 3):2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +105°C for V-temp
Param
No.
Symbol Characteristic Min. Typ. Max. Units Conditions
CTMU CURRENT SOURCE
CTMUI1 IOUT1 Base Range
(1)
— 0.55 — µA CTMUICON<9:8> = 01
CTMUI2 IOUT2 10x Range
(1)
— 5.5 — µA CTMUICON<9:8> = 10
CTMUI3 I
OUT3 100x Range
(1)
— 55 — µA CTMUICON<9:8> = 11
CTMUI4 I
OUT4 1000x Range
(1)
— 550 — µA CTMUICON<9:8> = 00
CTMUFV1 V
F Temperature Diode Forward
Voltage
(1,2)
—0.598— VTA = +25ºC,
CTMUICON<9:8> = 01
—0.658— VT
A = +25ºC,
CTMUICON<9:8> = 10
—0.721— VTA = +25ºC,
CTMUICON<9:8> = 11
CTMUFV2 VFVR Temperature Diode Rate of
Change
(1,2)
— -1.92 — mV/ºC CTMUICON<9:8> = 01
— -1.74 — mV/ºC CTMUICON<9:8> = 10
— -1.56 — mV/ºC CTMUICON<9:8> = 11
Note 1: Nominal value at center point of current trim range (CTMUICON<15:10> = 000000).
2: Parameters are characterized but not tested in manufacturing. Measurements taken with the following
conditions:
•V
REF+ = AVDD = 3.3V
• ADC module configured for conversion speed of 500 ksps
• All PMD bits are cleared (PMDx = 0)
• Executing a while(1) statement
• Device operating from the FRC with no PLL
3: The CTMU module is functional at V
BORMIN < VDD < VDDMIN, but with degraded performance. Unless
otherwise stated, module functionality is tested, but not characterized.