Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS61168E-page 261
PIC32MX1XX/2XX
FIGURE 29-8: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
TABLE 29-24: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
FIGURE 29-9: OCx/PWM MODULE TIMING CHARACTERISTICS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +105°C for V-temp
Param.
No.
Symbol Characteristics
(1)
Min. Typical
(2)
Max. Units Conditions
OC10 TCCF OCx Output Fall Time — — — ns See parameter DO32
OC11 T
CCR OCx Output Rise Time — — — ns See parameter DO31
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
OCx
OC11
OC10
(Output Compare
Note: Refer to Figure 29-1 for load conditions.
or PWM mode)
OCFA/OCFB
OCx
OC20
OC15
Note: Refer to Figure 29-1 for load conditions.
OCx is tri-stated
TABLE 29-25: SIMPLE OCx/PWM MODE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +105°C for V-temp
Param
No.
Symbol Characteristics
(1)
Min Typical
(2)
Max Units Conditions
OC15 TFD Fault Input to PWM I/O Change — — 50 ns —
OC20 T
FLT Fault Input Pulse Width 50 — — ns —
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.