Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS61168E-page 151
PIC32MX1XX/2XX
bit 3 Unimplemented: Read as ‘0’
bit 2 TSYNC: Timer External Clock Input Synchronization Selection bit
When TCS =
1:
1 = External clock input is synchronized
0 = External clock input is not synchronized
When TCS =
0:
This bit is ignored.
bit 1 TCS: Timer Clock Source Select bit
1 = External clock from TxCKI pin
0 = Internal peripheral clock
bit 0 Unimplemented: Read as ‘0’
REGISTER 12-1: T1CON: TYPE A TIMER CONTROL REGISTER (CONTINUED)
Note 1: When using 1:1 PBCmLK divisor, the user’s software should not read/write the peripheral SFRs in the
SYSCLK cycle immediately following the instruction that clears the module’s ON bit.