Datasheet

 2011-2012 Microchip Technology Inc. Preliminary DS61168E-page 121
PIC32MX1XX/2XX
REGISTER 10-1: U1OTGIR: USB OTG INTERRUPT STATUS REGISTER
Bit
Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
23:16
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
15:8
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
7:0
R/WC-0, HS R/WC-0, HS R/WC-0, HS R/WC-0, HS R/WC-0, HS R/WC-0, HS U-0 R/WC-0, HS
IDIF T1MSECIF LSTATEIF ACTVIF SESVDIF SESENDIF
—
VBUSVDIF
Legend: WC = Write ‘1’ to clear HS = Hardware Settable bit
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-8 Unimplemented: Read as ‘0’
bit 7 IDIF: ID State Change Indicator bit
1 = Change in ID state detected
0 = No change in ID state detected
bit 6 T1MSECIF: 1 Millisecond Timer bit
1 = 1 millisecond timer has expired
0 = 1 millisecond timer has not expired
bit 5 LSTATEIF: Line State Stable Indicator bit
1 = USB line state has been stable for 1 ms, but different from last time
0 = USB line state has not been stable for 1 ms
bit 4 ACTVIF: Bus Activity Indicator bit
1 = Activity on the D+, D-, ID or VBUS pins has caused the device to wake-up
0 = Activity has not been detected
bit 3 SESVDIF: Session Valid Change Indicator bit
1 =V
BUS voltage has dropped below the session end level
0 =V
BUS voltage has not dropped below the session end level
bit 2 SESENDIF: B-Device V
BUS Change Indicator bit
1 = A change on the session end input was detected
0 = No change on the session end input was detected
bit 1 Unimplemented: Read as ‘0’
bit 0 VBUSVDIF: A-Device VBUS Change Indicator bit
1 = Change on the session valid input detected
0 = No change on the session valid input detected