Information

 2009-2013 Microchip Technology Inc. DS80000441J-page 11
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 and PIC24HJ128GPX02/X04
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS70293G):
1. Module: Electrical Characteristics
For Parameter DC60d (Power-Down Current) in
Table 28-7, the maximum value is corrected to
read as 85 µA.
2. Module: Electrical Characteristics
For Parameter DI51d (Input Leakage Current) in
Table 28-9, the value is corrected to read as
±12 µA.
3. Module: Electrical Characteristics
For Parameter F21 (Internal RC Accuracy) in
Table 28-19, the values for the temperature range
of -40°C to +85°C are corrected to read as -30%
for minimum and +30% for maximum.
4. Module: Electrical Characteristics
Table 28-18: AC Characteristics: Internal RC
Accuracy should be replaced with the following
table.
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
TABLE 28-18: AC CHARACTERISTICS: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Characteristic Min Typ
(2)
Max Units Conditions
Internal FRC Accuracy @ 7.3728 MHz
(1)
F20 FRC -3 — 3 % -40°C  TA  -10°C VDD = 3.0-3.6V
FRC -2 — 2 % -10°C  T
A  +85°C VDD = 3.0-3.6V
FRC -5 — 5 % +85°C  TA  +125°C VDD = 3.0-3.6V
Note 1: Frequency calibrated at +25°C and 3.3V. TUNx bits can be used to compensate for temperature drift.
2: Negative current is defined as current sourced by the pin.