Datasheet

© 2009 Microchip Technology Inc. DS70175H-page 279
PIC24HJXXXGPX06/X08/X10
Section 18.0 “Enhanced CAN (ECAN™)
Module”
Removed sections 18.4 through 18.7 (redundant information, which
is now available in the related section in the “PIC24H Family
Reference Manual”).
Changed default bit value from ‘0’ to ‘1’ for bits 6 through 15
(FLTEN6-FLTEN15) in the CiFEN1 register (Register 18-11).
Section 19.0 “10-Bit/12-Bit Analog-to-
Digital Converter (ADC)”
Removed Equation 19-1 (ADC Conversion Clock Period) and Figure
19-3 (ADC Transfer Function (10-Bit Example)).
Updated AN14 and AN15 ADC values in the ADC2 Module Block
Diagram (Figure 19-2).
Added Note 2 to ADC Conversion Clock Period Block Diagram
(Figure 19-3).
Updated ADC Conversion Clock Select bits in the ADxCON3
register from ADCS<5:0> to ADCS<7:0>. Any references to these
bits have also been updated throughout this data sheet
(Register 19-3).
Added Note to ADxCHS0 register (Register 19-6).
Section 20.0 “Special Features” Added a Note after the second paragraph in Section 20.2 “On-Chip
Voltage Regulator”.
Section 23.0 “Electrical Characteristics” Added Note 3 to ADC Conversion (12-bit Mode) Timing
Requirements (Table 23-38 and Table 23-39).
TABLE A-1: MAJOR SECTION UPDATES (CONTINUED)
Section Name Update Description