Datasheet

© 2007-2012 Microchip Technology Inc. DS70293G-page 371
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
APPENDIX A: REVISION HISTORY
Revision A (September 2007)
Initial release of this document.
Revision B (March 2008)
This revision includes minor typographical and
formatting changes throughout the data sheet text. In
addition, redundant information was removed that is
now available in the respective chapters of the
dsPIC33F/PIC24H Family Reference Manual, which
can be obtained from the Microchip web site
(www.microchip.com).
The major changes are referenced by their respective
section in the following table.
TABLE A-1: MAJOR SECTION UPDATES
Section Name Update Description
“High-Performance, 16-bit Microcontrollers” Note 1 added to all pin diagrams (see “Pin Diagrams”)
Updated the “PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 and
PIC24HJ128GPX02/X04 Controller Families” table as follows:
• PIC24HJ128GP804 changed to PIC24HJ128GP504
• PIC24HJ128GP804 changed to PIC24HJ128GP504
• Added new column: External Interrupts
• Added Note 3
Section 1.0 “Device Overview” Updated parameters PMA0, PMA1 and PMD0 through PMPD7
(Table 1-1)
Section 6.0 “Interrupt Controller” IFS0-IFSO4 changed to IFS
X (see Section 6.3.2 “IFSx”)
IEC0-IEC4 changed to IEC
X (see Section 6.3.3 “IECx”)
IPC0-IPC19 changed to IPCx (see Section 6.3.4 “IPCx”)
Section 7.0 “Direct Memory Access (DMA)” Updated parameter PMP (see Table 7-1)
Section 8.0 “Oscillator Configuration” Updated the third clock source item (External Clock) in
Section 8.1.1 “System Clock Sources”
Updated TUN<5:0> (OSCTUN<5:0>) bit description (see
Register 8-4)
Section 19.0 “10-bit/12-bit Analog-to-Digital
Converter (ADC1)”
Added Note 2 to Figure 19-3
Section 24.0 “Special Features” Added Note 2 to Figure 24-1
Added Note after second paragraph in Section 24.2 “On-Chip
Voltage Regulator”