Datasheet

 2009-2012 Microchip Technology Inc. DS70592D-page 285
PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-44: DMA READ/WRITE TIMING REQUIREMENTS
TABLE 24-43: ADC CONVERSION (10-BIT MODE) TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min. Typ
(1)
Max. Units Conditions
Clock Parameters
AD50 T
AD ADC Clock Period 76 — — ns —
AD51 tRC ADC Internal RC Oscillator Period — 250 — ns —
Conversion Rate
AD55 t
CONV Conversion Time — 12 TAD —— —
AD56 FCNV Throughput Rate — — 1.1 Msps —
AD57 T
SAMP Sample Time 2 TAD ——— —
Timing Parameters
AD60 tPCS Conversion Start from Sample
Trigger
(2)
2.0 TAD — 3.0 TAD — Auto-Convert Trigger
not selected
AD61 t
PSS Sample Start from Setting
Sample (SAMP) bit
(2)
2.0 TAD — 3.0 TAD ——
AD62 t
CSS Conversion Completion to
Sample Start (ASAM = 1)
(2)
—0.5 TAD —— —
AD63 t
DPU Time to Stabilize Analog Stage
from ADC Off to ADC On
(2,3)
——20s—
Note 1: These parameters are characterized but not tested in manufacturing.
2: Because the sample caps eventually loses charge, clock rates below 10 kHz may affect linearity
performance, especially at elevated temperatures.
3: tDPU is the time required for the ADC module to stabilize when it is turned on (AD1CON1<ADON> = 1).
During this time, the ADC result is indeterminate.
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Characteristic Min. Typ Max. Units Conditions
DM1a DMA Read/Write Cycle Time — — 2 T
CY ns This characteristic applies to
PIC24HJ256GPX06A/X08A/X10A
devices only.
DM1b DMA Read/Write Cycle Time — — 1 TCY ns This characteristic applies to all
devices with the exception of the
PIC24HJ256GPX06A/X08A/X10A.